A Microwave Antenna Path-alignment Test Set.

#From_Jordan
A Microwave Antenna Path-alignment Test Set.
Microwave links require accurate path alignment to ensure proper operation. This process has traditionally required highly trained tower crews to physically align the antennas as well as ground technicians and complex and expensive test equipment to monitor the results.

Tower installation crews now can perform the entire alignment process on the tower without the need for additional ground technicians or equipment.

A test set that offers an accurate and cost-effective method of microwave antenna alignment that is easily performed by two technicians without the use of system radios

The Traditional Process

The traditional antenna alignment process requires the use of a transmitter and receiver located at each end of the microwave link. The transmitter generates the signal that passes through the transmission line to the antenna, which radiates the signal over free space to the receive antenna. If the antennas are optimally aligned, the largest concentration of signal (main beam) is emitted and received and maximum signal transfer is achieved. If the antennas are not aligned properly, the signal transfer is degraded and dynamic range is lost.

New Method by Path Align-R  model 2200 microwave antenna path alignment test set

#هندسة_الاتصالات